Tempco Element Wavelengths
Type KTE Elements
Design Features
- Translucent Tubes
- Standard industry sizes and ratings up to 60 w/in2 (interchangeable with CRC, CRB, CRN and CRZ ceramic heaters).
- Highly reflective rugged aluminized steel housing construction.
- Rapid response — 2.5 to 7.5 deg F / sec. heat-up / cool-down rates, depending on unit watt density.
- Medium wavelength output (2.5 – 6 microns).
- Standard winding pattern gives uniform heating over entire face of heater. (Consult factory for custom or high intensity winding patterns and/or sizes.)
- Optional built-in type K or J T/C available in center of unit face.
- Ideal for systems requiring small area zoning and close control of process.
- Best when used at radiation distances of 4 – 10″ from work.
- Suitable for horizontal or vertical operation with tubes in horizontal plane.
- Designed for use in CRA linear structural housings and ARV array assemblies
- 120, 208, 240, 277 or 480V design (consult factory for 575V units)
Type KTG Elements
Design Features
- Clear Tubes with Gold Coated Ceramic Backing: up to 95% reflective efficiency
- Standard industry sizes and ratings up to 60 w/in2 (interchangeable with CRC, CRB, CRN and CRZ ceramic heaters).
- Highly reflective rugged aluminized steel housing construction.
- Rapid response — 2.5 to 7.5 deg F / sec. heat-up / cool-down rates, depending on unit watt density.
- Medium wavelength output (2.5 – 6 microns).
- Standard winding pattern gives uniform heating over entire face of heater. (Consult factory for custom or high intensity winding patterns and/or sizes.)
- Optional built-in type K or J T/C available in center of unit face.
- Ideal for systems requiring small area zoning and close control of process.
- Best when used at radiation distances of 4 – 10″ from work.
- Suitable for horizontal or vertical operation with tubes in horizontal plane.
- Designed for use in CRA linear structural housings and ARV array assemblies
- 120, 208, 240, 277 or 480V design (consult factory for 575V units)