Tempco Cooling/Flow Tube Fittings
Type FF: Flared Seal Fittings
Brass flared seal fittings are well adapted for low to medium pressure and resistant to mechanical pullout. Available for 3/8″ and 1/2″ diameter tubing with SAE 45° flare.
Type HS: Hi-Seal Fittings
Hi-seal brass fittings are highly dependable under the most adverse conditions. For reliable and trouble-free service with ease of installation, we strongly recommend hi-seal fittings. Available for 3/8″ and 1/2″ diameter tubing. The male thread is 1/2″ NPT for 1/2″ tube and 3/8″ tube.
Type RA: 90° Copper Elbow
90° copper elbow is brazed to the Cast-In Heater cooling tube extension with additional tube extension for connecting cooling lines with compression and/or flared fittings. Available for 3/8″ and 1/2″ diameter tubing.
Type RT: Cast Brass 90° Threaded Elbow
90° threaded elbow is brazed to the cooling tube extension, providing an easy and quick method for connecting cooling lines. Recommended to be factory installed to assure good braze seals. Available for 3/8″ and 1/2″ NPT internal threads.
Type R3: Straight Threaded Copper Fitting
Straight threaded fitting is brazed to the cooling tube extensions, providing an easy and quick method for connecting cooling lines. Recommended to be factory installed to assure good braze seals. Available for 3/8″ and 1/2″ diameter tubing with internal threads. /
No Cooling Tube Fittings
Cooling Tube Fittings are not required.
If you want to add an Electrical Termination please change your selections above.