Mini Label Eye Sensors
Eagle Sensors is an authorized Tri-Tronics distributor. Contact us for sales and application support.
TriTronics Mini Label Eye Brochure
MLE
The MINI LABEL EYE® is a special purpose gap or slot sensor optimized to sense adhesive labels adhering to a roll of backing paper.
GET THE OPTICAL ADVANTAGE!
The MLE’s specially designed optics greatly reduces sensitivity to web flutter. The high intensity IR LED penetrates thicker backing material and reduces temperature drift.
The astonishing 35 microseconds allows the MLE to keep up with even the fastest high speed rewinders.
This miniature sensor can fit into many small spaces at only 10mm wide. The fork design with integrated bracket keeps mounting easy.
The oversize Status Indicator can be seen even from a distance away. Displays GREEN when the sensor is powered on, and displays RED when the output is ON.
Specifications
SUPPLY VOLTAGE: 4.75 to 30Vdc Polarity Protected CURRENT REQUIREMENTS: 18 milliamps (exclusive of load)OUTPUT TRANSISTORS: NPN or PNP (dependent on model) Outputs sink or source up to 120 milliamps (current limit) All outputs are continuously short circuit protected. REMOTE SET INPUT Active high (PNP) or active low (NPN), depending on model (1ma) Transient spike protected RESPONSE TIME: 35 microseconds LED LIGHT SOURCE: High Intensity IR LEDAMBIENT TEMPERATURE: -40ºC to 70ºC (-40ºF to 158ºF)PUSH BUTTON CONTROL: One push AUTOSET LT/DK inverts output Adjusts threshold (+ or -) |
HYSTERESIS 5%LIGHT IMMUNITY Responds to sensor’s pulsed modulated light source, resulting in high immunity to most ambient light INDICATORS GREEN or RED to indicate power is on. AMBER during AUTOSET Red when sensor’s output transistors are ON, and GREEN when they are off. NOTE: Flashes RED when a short circuit condition exists. CONNECTIONS: M8, 4-pin Male Attached cable: 4-wire 6ft (1.8m)HOUSING CONSTRUCTION: Top lid: polycarbonate Output window: ABS Case: 50% glass filled nlyon Buttons: silicon rubber RATINGS AND CERTIFICATIONS: IP65 CE UL Pending |
Features
Dimensions
Showing all 4 results