RLY-4 and RLY-8 Remote Relays
Provides an additional 4 or 8 physical relays to a fixed gas detection system plus an additional 2 or 4 horn/strobe drives
The RLY-4 and RLY-8 are remote relay devices that offer up to four and eight (respectively) additional SPDT dry contact relays to a fixed gas detection system
Datasheet-RLY-4-RLY-8Applications
- Parking Facilities
- Vehicle Repair Shops
- Manufacturing Plants
- Food Processing Plants
- Cold Storage Facilities
- and many more…
Key Features
- Increases the number of available relays
- Includes 2 (RLY-4) or 4 (RLY-8) horn/strobe drive outputs
- User selectable gas alarm activation level for each relay (set at the controller)
- User selectable “Failsafe” and latching operation (set at the controller)
- ON/OFF Delay configurations (set at the controller)
- User configurable to revert to a default state if connection is lost with the controller (set at the controller)
- Modbus® RS-485 RTU communication
- Standard water / dust tight, corrosion resistant enclosure
Description
The RLY-4 is specifically designed to communicate with the QCC Quad Channel Controller and the FCS Multi Channel System Controllers via Modbus® communications protocol. It offers 4 physical relays rated 5 amps @ 240 VAC and 2 horn/strobe drives rated 0.5 amp @ 24 VDC.
The RLY-8 is designed to work with the FCS models only. It offers 8 physical relays rated 5 amps @ 240 VAC each and 4 horn/strobe drives rated 0.5 amp @ 24 VDC.
The RLY-4 and RLY-8 can be used to control remote alarms, strobes, exhaust fan starters, make up air fan contactors, etc. In the event that the connection is lost between the controller and the remote relay, a user configurable default state can be set to ensure the relays continue to operate as required. Both devices come in a standard water / dust tight, corrosion resistant ABS / polycarbonate enclosure with a hinged, secured door.