Infrared Radiant Panels
The placement of the resistance coils is carefully designed to provide uniform heat distribution. The refractory material is backed by layers of insulation to minimize back heat loss. The standard housing is made of heavy gauge aluminized steel. Optional housing materials include 304 Stainless Steel. The backside of the housing has a terminal box for electrical wiring with ceramic terminal bushings and stainless steel screw terminals. Options available include: Standard quartz tube thermowell and clamp on the short side, standard Type K or J 1/8″ diameter thermocouple probes and various back mounted thermowell/thermocouple combinations.
Eagle Sensors & Controls, Division of Excel Automation LLC, is an authorized Tempco distributor. Contact us for sales & technical support for Tempco heaters, Tempco sensors, Tempco temperature controllers, Tempco process heating systems & all other Tempco products.
Construction Styles
Style RPB
Maximum Size: See Preconfigured Part Number pages for Standard Sizes; Custom sizes up to 30″W × 84″L can be manufactured.
Maximum Watt Density: 25 Watts/in2
Maximum Voltage: Voltage can be single, dual or 3-phase up to 600 VAC (depending on heater size and wattage)
Maximum Face Temperature: 900°C (1652°F)
Wavelength Range: Between 2.5 and 6.0 microns (µm)
Distributed Wattage & Zoning: Yes, dependent on size
Style RPG
Maximum Size: See Preconfigured Part Number pages for Standard Sizes; Custom sizes up to 34″W × 36″L can be manufactured.
Maximum Watt Density:20 Watts/in2
Maximum Voltage: Voltage can be single, dual or 3-phase up to 600 VAC (depending on heater size and wattage)
Maximum Face Temperature: 750°C (1382°F)
Wavelength Range: Between 2.5 and 6.0 microns (µm)
Distributed Wattage & Zoning: Yes, dependent on size
Style RPW
Maximum Size: See Preconfigured Part Number pages for Standard Sizes; Custom sizes up to 24″W × 24″L can be manufactured.
Maximum Watt Density: 40 Watts/in2
Maximum Voltage: Voltage can be single, dual or 3-phase up to 600 VAC (depending on heater size and wattage)
Maximum Face Temperature: 800°C (1472°F)
Wavelength Range: Between 2.5 and 6.0 microns (µm)
Distributed Wattage & Zoning: Yes, dependent on size
Style RPM
Maximum Size: See Preconfigured Part Number pages for Standard Sizes; Custom sizes up to 24″W × 48″L can be manufactured.
Maximum Watt Density:15 Watts/in2
Maximum Voltage: Voltage can be single, dual or 3-phase up to 600 VAC (depending on heater size and wattage)
Maximum Face Temperature: 700°C (1292°F)
Wavelength Range: Between 3.0 and 6.0 microns (µm)
Distributed Wattage & Zoning: Yes, dependent on size
Series Size
Standard thickness
Thickness: 3
Optional thickness
Thickness Range: 1.5″ – 5″
Consult Tempco with your requirements.
Mounting Styles
Mounting Screw Studs
Manufactured standard with Mounting Screw Studs: 1/4-20″ x 1″L and can be mounted in any direction
Housing Materials
Standard Housing Material
Heavy gauge aluminized steel
Optional Housing Material
304 Stainless Steel
Electrical Terminations
Standard Termination
Stainless Steel power screw terminals, Electrical junction box, standard
Sensor Options
Standard Side Mount Thermowell With Clamp
The standard Side Mount Thermowell with Clamp is a 5″ long, 4 mm ID quartz glass tube, installed in the short side of the panel, just behind the resistance coil. The screw pressure clamp and thermowell are designed to hold a 0.125″ diameter probe.
Replacement TC Probes (with 48″ leads, SS overbraid)
Type K — Part Number: MTA00839
Type J — Part Numbe: MTA00840
Back Mount Thermowell with Compression Fitting
The optional Back Mount Thermowell with Adjustable Compression Fitting is a short, 4 mm ID quartz glass tube, mounted perpendicular to the face with a ceramic disk at the bottom. The compression fitting and glass tube are sized for a 0.125″ diameter probe.
Replacement TC Probes (with 48″ leads, SS overbraid)
Type K — Part Number: MTA00839
Type J — Part Numbe: MTA00840
Back Mount Thermowell with Bayonet Fitting
Back Mount Thermowell with Bayonet Fitting
The optional Back Mount Thermowell with Bayonet Fitting is a short, 8 mm ID quartz glass tube, mounted perpendicular to the face with a ceramic disk at the bottom. The bayonet fitting and glass tube are sized for a 0.187″ diameter probe.
Replacement TC Probes (with 48″ leads, SS overbraid)
Type K — Part Number: TCP50270
Type J — Part Number: TCP50269
Back Mount Thermowell – Parallel to Face
The optional Back Mount Thermowell (Parallel to Face) is a 5″, 6 mm ID quartz glass tube with a soft 90° bend, mounted along the face, exiting in the rear. A maximum 0.063″ diameter probe is required to make the bend. Screws and ceramic spacers are provided.
Replacement TC Probes (with connector set)
Type K — Part Number: MTA01546
Type J — Part Number: MTA01775