icotek KEL-DPU 24 gray

KEL-DPU entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm (0,126 to 0,807″) (in diameter) in limited space with IP66 / IP68 / up to UL type 4X ratings.

The KEL-DPU is particularly characterized by its solid robust frame and the increased strain relief of the routed cables.

The KEL-DPU 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself.

The assembly of the KEL-DPU with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.

ST-B Plugs can be used for sealing pierced membranes if cables have been removed.

Eagle Sensors and Controls is an authorized icotek distributor. Contact us with sales and technical support.

Downloads

Catalog Page

Advantages

  • Snap or screw mounting possible
  • High strength & stability
  • High strain relief
  • Fast and easy assembly
  • High cable density
  • Dual cable sealing with IP66/IP68/up to UL type 4X
  • Hygienic design – free of dirt-collecting recesses

Specifications

  • IP rating: IP65, IP66, IP67, IP68
  • UL Type: 4X, 12
  • For wall thickness: 1.5 – 2 mm
  • For wall thickness (inch): 0.059 – 0.079 “
  • Material: Elastomer
  • Material base frame: Polypropylene
  • Color: gray (similar RAL 7035)
  • Flame class: UL94-V0, self-extinguishing
  • Temperature (°C): -40 – 100 °C (static)
  • Temperature (°F): -40 – 212 °F
  • Properties: Halogen free, Silicone free
  • Mounting type: Screw type mounting, Snap-in
  • No. of screw holes: 4
  • Diam. of screw holes: Ø 5.8 mm
  • Diam. of screw holes (inch): Ø 0.228 “