Panasonic / Sunx HL-D3 Specifications
Excel Automation is an authorized Panasonic / Sunx distributor. Contact us with sales and application support.
| Type | Diffuse reflection type | ||
|---|---|---|---|
| Model No. | HL-D301B | HL-D301C | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||
| Measurement center distance | 50 mm 1.969 in | ||
| Height (Z axis) measurement range | ±10 mm ±0.394 in | ||
| Measurement range of width (X axis) |
Near side | 11.5 mm 0.453 in | |
| Measurement center | 12.5 mm 0.492 in | ||
| Far side | 12.5 mm 0.492 in | ||
| Unit of measurement output |
Height (Z axis) | 0.1 μm 0.004 mil | |
| Width (X axis) | 1 μm 0.039 mil (Note 2) | ||
| Resolution | Height (Z axis) | 1 μm 0.039 mil (Note 3) | |
| Width(X axis) | 5 μm 0.197 mil (Note 2, 4) | ||
| Linearity (Note 5) | Height (Z axis) | ±0.1 % F.S. | |
| Temperature characteristic | 0.02 % F.S./℃ | ||
| Light source | Red semiconductor lase (Peak wavelength 658 nm 0.026 mil) | ||
| Output | Max. output: 1 mW | Max. output: 5 mW | |
| Laser class | Class 2 [IEC / JIS / FDA (Note 6)] |
Class 3R [IEC / JIS / FDA (Note 6)] |
|
| Beam size (Note 7) | 50 μm × 15 mm 1.969 mil × 0.591 in | ||
| Receiving element | CMOS 2D image sensor | ||
| Indicator | Laser emission | Green LED (lights up during laser emission) | |
| Measurement range | Yellow LED [lights up when near the measurement center distance, blinks when within the measuring range, and lights out when outside of the measuring range. (at the measurement center position in the width direction)] |
||
| Environmental resistance |
Protection | IP67 (IEC) (excluding the connector) | |
| Ambient temperature | 0 to +45 ℃ +32 to +113 ℉ (No dew condensation allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
||
| Ambient humidity | 35 % to 85 % RH, Storage: 35 % to 85 % RH | ||
| Ambient illuminance | Incandescent light: 3,000 ℓx or less at the light-receiving face (No direct sunlight or its reflection allowed) |
||
| Vibration resistance | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X,Y and Z directions for two hours each | ||
| Shock resistance | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions three times each | ||
| Cable | Cabtyre cable, 0.5 m 1.640 ft long with connector | ||
| Cable extension | Extension up to total 20 m 65.617 ft is possible, with optional cable. | ||
| Materials | Enclosure: Die-cast aluminum, Case cover: Die-cast aluminum, Front cover: Glass | ||
| Weight | 500 g approx. (including cable) | ||
| Accessory | Laser warning label: 1 set | ||