SSC Dual-Pedal F-Series Models (DF-Series)

The DF-Series dual pedal foot switch models add any two of the F-Series single foot pedal models onto a welded steel base with bumper feet.  If you choose models without cables, then they will have a connector tube to route the wiring from one side to the other, with a single cable exit point.  If you choose two separate models with cables, then they will be independent and not connected by the connector tube.  Great for pipe rollers, scissor lifts, tube and pipe benders, lift tables, twin pedal, up/down, forward/reverse, and left/right foot switch applications.  Please read the foot switch safety warning before purchasing any foot switch.

  • Medium-duty construction — ideal for industrial, shop, and office environments.
  • Die-cast zinc alloy housing with steel platform provides superior durability and long life.
  • Cable cord grip is included (fits up to .60″ cable diameter).
  • Includes rubber bumper feet.
  • Enclosure rating: CSA/NEMA Type 1; IEC 60529 IP20
  • Certified to CSA and UL standards.
  • Size (single unit exterior dimensions): 8.4″ L x 4.9″ W x 2.1″ H; 4.7 pounds

DF-Series Dual Pedal Foot Switch Models

Info Sheet

 Model Action* Electrical Rating, Each Side Circuit Cable

DF-Series Dual Pedal Foot Switch (front view)

DF-Series Dual Pedal Foot Switch (back view)

Info Sheet

Exterior Dimensions

CSA Logo

 DF200 dual foot switch, momentary 15 A, ½ HP, 125/250 VAC; 0.1 A, 125 VDC SPDT each side with quick-connect tabs for terminals or solder none
DF200-1302 dual foot switch, momentary 13 A, ½ HP, 125/250 VAC; 0.1 A, 125 VDC comes pre-wired normally open with 16-gauge, 4-conductor cable 8 ft
DF202 dual foot switch, momentary 15 A, ½ HP, 125/250 VAC; 0.1 A, 125 VDC DPDT each side with quick-connect tabs for terminals or solder none
DF300 dual foot switch, maintained 20 A, 125 VAC; 10 A, 250 VAC; 1.5 HP, 125/250 VAC SPST with wire leads inside foot switch for connection to cable none
DF500 dual foot switch, momentary 20 A, 125/250 VAC; 1 HP, 125 VAC; 2 HP, 250 VAC SPDT each side with screw terminals none

Eagle Sensors & Controls is an authorized SSC distributor. Contact us for sales and application support.