Nexthermal Nextflex

The Nextflex Advantage

Optimized Durability
Nextflex features an inner layer of highly compressed copper powder, giving Nextflex increased durability while maintaining flexibility.
User Formable – Heavy-Duty Design
Nextflex’s robust design is engineered with a flexible solid casing that stays in the groove, yet is easy to install.
Same Day Shipping
Ships in simple-to-install straight lengths the same day for orders placed before 2PM Eastern Standard Time.
Marked at Center & Cold Sections
Nextflex is conveniently marked at both the center and the cold sections for visual verification during installation.
Made in the USA
Nextflex heaters are manufactured in the United States in Battle Creek, Michigan.
Common Applications
  • Plastic Injection Molding
  • Rubber Molding
  • Packaging
  • Plastic Welding
  • Plate Heating
  • Specialty Heated Tools
  • Food Processing Market
  • Top Seal Packaging

 

Nextflex Tips

Screw Terminal (Standard)

Plug n Heat Ceramic Insulated

Lead Wire with Fiberglass Sleeve

 

Installation
Step 1:
Starting at the center of the groove, bend the Nextflex heater at the center mark consistent with the direction of the groove.
Step 2:
Hold the Nextflex heater directly above the groove at the point of installation. Strike the Nextflex heater hard to seat it well. Form and install in short lengths to prevent rebending. Always start by installing the heater at the center mark at the center location of the groove.
Step 3:
It is important to make sure the Nextflex heater is directly above the groove prior to striking. Form and install in 1 to 2 inch sections (25 to 50 mm).
The heater is flexible due to annealing. Multiple bends in the same location “work harden” the heater. For best results, form the heater as precisely as possible prior to installing in the groove.
Step 4:
While keeping the heater flat and forming it with your free hand, bend the heater to match the groove.
Step 5:
One strong strike is more effective than two soft strikes. If your groove dimensions are correct, you will not damage the internal heater.
Step 6:
The Nextflex staking tool is a key component in the seating the heater properly. This improves heat transfer and maximizes heater life. Strike hard to stake every 3/4 in (about 20 mm).
Eagle Sensors & Controls is an authorized Nexthermal distributor. Contact us for sales and application support.