HI-DENSITY CARTRIDGE HEATERS
Standard sheath material is 321 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants. Grade “A” Nickel-Chrome resistance wire precisely wound on a high purity magnesium oxide core places the resistance wire as close to the inside of the sheath as possible. A high purity Magnesium Oxide (MgO) powder is used to fill all remaining space inside the sheath. Heater is then swaged, which compacts the magnesium oxide grains into a solid mass. The standard termination for is Type N, 10″ (254 mm) long nickel conductor lead wires externally connected to solid conductor terminal pins.
TERMINATOR PROGRAM
A select amount of heater specifications are available in our expedited shipping Terminator Program. Choose your desired shipping window and browse available selections below.
These Program-Qualified Lead Terminations and Options for Stock Cartridge Heater Substrates will ship either Same or Next Day or 2nd or 3rd Day when ordered before 2PM (CST).
These heaters are semi-finished (substrates), offering you the option to finish them by choosing from 19 program-qualified lead end terminations and options on select cartridge heater diameters. Cartridge heaters will be ready for shipment within 1 to 3 days, depending on the termination/option selected.
Ordering Information — Follow These Simple Steps
1. Select a diamter available in the Terminator Program or refer to the Preconfigured Cartridge Heater Part Numbers:
- 1/4″
- 5/16″
- 3/8″
- 1/2″
- 5/8″
- 3/4″
2. Chose a Program qualified Electrical Termanation (required), Termination Option (optional) and Power Variation (optional).
3. Specify your lead requirements in the event that the standard supplied lengths for Plain Leads (10″), Braid or Armor Cable (10″ over 12″ leads) are not suited for your application.
