Backer Hotwatt Special Purpose Glasrope Heaters

• The Backer Hotwatt High Temperature Glasrope Heater is similar to the Standard Single Glasrope Heater in construction except the woven fiberglass braid is of special design to withstand higher temperatures.
• Nominal diameter is .165″.
• Lengths to 300″.
• Maximum operating temperature is 1200° F.
• Made in U.S.A.

• Flexible woven high temperature fiberglass braid.
• Premium grade resistance wire element.
• Braid retainer.
• Fiberglass insulated leads.

Maximum wattage is computed at 7 watts per linear inch.

Specify: GH16-followed by length, wattage, voltage, lead length, and special features if required.

Example: GH16-80/400W/120V/SF1-10.

• The Backer Hotwatt Silicon Rubber Glasrope Heater is sheathed in silicone rubber for use in wet or moist applications.
• The heater is supplied with neoprene insulated flexible leads.
• Nominal diameter is .165″.
• Lengths to 300″.
• Maximum operating temperature is 325° F.
• Made in U.S.A.

1. Silicone rubber sleeve.
2. Premium grade resistance wire element.
3. Sleeve retainer.
4. Insulated leads.

Maximum wattage is computed at 3 watts per linear inch.

Specify: GS16-followed by length, wattage, voltage, lead length, and special features if required.

Example: GS16-30/50W/120V/SF1-12.

• The Backer Hotwatt Flexible Metal Glasrope is for high temperature, corrosive applications.
• Nominal diameter is .250″.
• Lengths to 120″.
• Maximum temperature is 1300° F.
• Made in U.S.A.

Maximum wattage is computed at 5 watts per linear inch.

Specify: FM25-followed by length, wattage, voltage, lead length, and special features if required.

Example: FM25-72/250W/120V/SF1-6.

SF11A: Ring terminals. Specify size: #6, #8, #10.

Terminals may be supplied attached to the end of the lead or directly on the glasrope.

Wattage tolerances are held to +5%, -10% at the voltage specified.