Tempco Thermostats

/Tempco/Data-Assets/11-Process-Images/WebH599.jpg

DPST Thermostat

Double Pole – Single Throw Thermostats: Style B, Style C

/Tempco/Data-Assets/11-Process-Images/WebH599.jpg

SPST Thermostat

Single Pole – Single Throw Thermostats: Style A, Style D, Style F

Request Other Thermostat

If your filter selections do not return your desired results from our standard configurations, please continue to select your Specifications.

When you are finished, save your selections in the Wish List (using the button at the right of this page) and follow the steps to submit them to Tempco.

Thermostat Options

/Tempco/Data-Assets/11-Process-Images/Web1005-60.jpg

Stuffing Box Assembly

The Stuffing Box Assembly is used to seal the thermostat capillary when the sensing bulb (3/8″ max. OD) is immersed directly in a liquid rather than in a thermowell. The Stuffing Box consists of six slotted washers used to compress a graphite packing into a 3/8″ NPT male pipe thread fitting. Assembly Instructions Feed sensing bulb through hole in upper and lower fitting. Insert washers and packing into top cavity of lower fitting. Upper fitting then screws into lower fitting, creating the seal. Part Number: TST-109-101

/Tempco/Data-Assets/11-Process-Images/WebK506.jpg

Thermowells

Stainless Steel or Plain Steel: Thermowells provide protection for bulb and capillary sensors. They are supplied with a 1/2″ NPT male thread for mounting and a 3/8″ NPT internal thread that can be used with the stuffing box assembly to secure the capillary to the well. ID: 0.50″, OD: 0.56

Heater Options

/Tempco/Data-Assets/11-Process-Images/WebPH2.jpg

Flow Control Baffles

For flange heaters used in circulation tanks, to aid heat transfer by forcing the liquid or gas back and forth across the elements. Baffles can be custom designed and positioned for your application.