Panasonic / Sunx Specifications

Excel Automation is an authorized Panasonic / Sunx distributor. Contact us with sales and application support.

Specifications

Type Thru-beam
Front sensing Side sensing Front sensing Side sensing Front sensing
Model No.
(Note 2)
Light-ON EX-11SA
(-PN)
EX-11SEA
(-PN)
EX-13SA
(-PN)
EX-13SEA
(-PN)
EX-19SA
(-PN)
Dark-ON EX-11SB
(-PN)
EX-11SEB
(-PN)
EX-13SB
(-PN)
EX-13SEB
(-PN)
EX-19SB
(-PN)
Sensing range 150 mm 5.906 in 500 mm 19.685 in 1 m 3.281 ft
Min. sensing object ø0.5 mm ø0.020 in
opaque object
ø1.0 mm ø0.039 in
opaque object
ø1.0 mm ø0.039 in
opaque object
ø2.0 mm ø0.079 in
opaque object
ø2.0 mm ø0.079 in
opaque object
Hysteresis
Repeatability
(perpendicular to sensing axis)
0.05 mm 0.002 in or less
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less
Output <NPN output type>
NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)<PNP output type>
PNP open-collector transistor
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
Utilization category DC-12 or DC-13
Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Incident beam indicator
Stability indicator Green LED
(lights up under stable light received condition or stable dark condition)
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature -25 to +55 ℃ -13 to +131 
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Material Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable 0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable,
2 m 6.562 ft long
Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver).
Weight Net weight (each emitter and receiver): 20 g approx.,
Gross weight: 50 g approx.
Accessories Mounting screws: 1 set