Panasonic / Sunx NA1-11 Specifications

Excel Automation is an authorized Panasonic / Sunx distributor. Contact us with sales and application support.

Type NPN output PNP output
Model No. NA1-11 NA1-11-PN
CE marking directive compliance EMC Directive, RoHS Directive
Sensing height 100 mm 3.937 in
Sensing range (Note 2) 0.17 to 1 m 0.558 to 3.281 ft
Element pitch 10 mm 0.394 in
Number of emitting / receiving
elements
11 Nos. each on the emitter and the receiver, respectively
Sensing object ø13.5 mm ø0.531 in or more opaque object (Note 3)
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption Emitter: 80 mA or less, Receiver: 100 mA or less
Output NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current)
0.4 V or less (at 16 mA sink current)
PNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 1 V or less (at 100 mA source current)
0.4 V or less (at 16 mA source current)
Utilization category DC-12 or DC-13
Output operation ON or OFF when beam channel is interrupted, selectable by operation mode switch
Short-circuit protection Incorporated
Response time In Dark state: 5 ms or less, In Light state: 10 ms or less
Indicators Emitter Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is Low,
lighting pattern is selected
by operation mode switch)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is High,
lighting pattern is selected
by operation mode switch)
Receiver Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is Low,
lighting pattern is selected
by operation mode switch)
Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is High,
lighting pattern is selected
by operation mode switch)
Pollution degree 3 (Industrial environment)
Protection IP62 (IEC)
Ambient temperature -10 to 55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system)
Material Enclosure: Heat-resistant ABS, Lens: Acrylic, Indicator cover: Acrylic
Cable 0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable.
Weight Net weight: Emitter 80 g approx., Receiver 85 g approx, Gross Weight: 210 g approx.