Panasonic / Sunx ER-X Specifications

Excel Automation is an authorized Panasonic / Sunx distributor. Contact us with sales and application support.

Type Spot type Bar type
Model No. ER-X001 ER-X008 ER-X016 ER-X032 ER-X048 ER-X064
CE marking directive compliance EMC Directive, RoHS Directive
Effective charge
removal width
50 mm
1.969 in
approx.
80 mm
3.150 in
approx.
160 mm
6.299 in
approx.
320 mm
12.598 in
approx.
480 mm
18.898 in
approx.
640 mm
25.197 in
approx.
Charge removal time
(±1,000 V→±100 V)
0.3 sec. or less (Note 1),
0.5 sec. or less (Note 2)
1 sec. or less (Note 2)
Ion balance ±30 V or less (Note 2, 3)
Discharge method Pulse AC method
Discharge frequency 50 Hz / 20 Hz 50 Hz / 30 Hz / 20 Hz
/ 10 Hz / 5 Hz / 1 Hz
100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note 4)
Discharge output voltage ±7,000 V approx.
Ozone generation 0.01 ppm or less (Note 2)
Maximum air pressure 0.5 MPa
Applicable fluid Air (dried clean air) (Note 5)
Operating altitude 2,000 m 6561.68 ft or less (Note 6)
Ambient temperature 0 to +50 ℃ +32 to +122 ℉ (ER-X001: 0 to +40 ℃ +32 to +104 ℉) (No dew condensation),
Storage: -10 to +65 ℃ +14 to +149 ℉
Ambient humidity 35 to 65 % RH, Storage: 35 to 85 % RH
Vibration resistance 10 to 55 Hz (ER-X001: 10 to 150 Hz) frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure grounding method Floating
Material Main unit enclosure: PPS, Stainless steal (SUS), Head mounting bracket: Stainless steal (SUS), Discharge needle: PC, PPS, Tungsten (Note 7)
[ER-X001 – Main unit enclosure: Stainless steel (SUS), Head mounting bracket: Stainless steel (SUS), Discharge needle: PFA, Tungsten]
Length of high-voltage cable 1.2 m 3.937 ft 0.5 m 1.640 ft 0.5 m 1.640 ft (Note 4)
Net weight 370 g approx. 330 g approx. 410 g approx. 530 g approx. 650 g approx. 780 g approx.
Accessory Head mounting bracket (mounted at the factory)
Type High and low temperature resistant
Model No. ER-X008HC ER-X016HC ER-X032HC ER-X048HC ER-X064HC
CE marking directive compliance EMC Directive, RoHS Directive
Effective charge
removal width
80 mm
3.150 in
approx.
160 mm
6.299 in
approx.
320 mm
12.598 in
approx.
480 mm
18.898 in
approx.
640 mm
25.197 in
approx.
Charge removal time
(±1,000 V→±100 V)
1 sec. or less (Note 2)
Ion balance ±30 V or less (Note 2, 3)
Discharge method Pulse AC method
Discharge frequency 30 Hz (Note 8)
Discharge output voltage ±7,000 V approx.
Ozone generation 0.01 ppm or less (Note 2)
Maximum air pressure 0.1 MPa
Applicable fluid Air (dried clean air) (Note 5)
Operating altitude 2,000 m 6561.68 ft or less (Note 6)
Ambient temperature Head: -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing) (Note 9), Storage: -10 to +65 ℃ +14 to +149 ℉
High voltage unit: 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage: -10 to +65 ℃ +14 to +149 ℉
Ambient humidity 35 to 65 % RH, Storage: 35 to 85 % RH
Vibration resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure grounding method Floating
Material Main unit enclosure: PPS, Stainless steal (SUS), Head mounting bracket: Stainless steal (SUS),
Discharge needle: PC, PPS, Tungsten, Main unit enclosure of high-voltage unit: ABS
Length of high-voltage cable Heat-resistant shielded cable, 1.8 m 5.906 ft
Net weight 420 g approx. 490 g approx. 620 g approx. 760 g approx. 900 g approx.
Accessories ø6 ø0.236-4 Air tube joint: 1 pc., Seal cap: 1 pc., Head mounting bracket (mounted at the factory)